Видео

what's the best way to clean the microfiber towels, sponge applicators, and brushes?

I never dry my vehicles with air, you’re actually blowing dust and other junk into it.

do i apply this immediately after applying the ceramic coating or after it cures?

The rinse aid is a game changer if you don't have a ceramic coating. It works amazingly well.

1- Clayed my wife’s caddy 2- light compound 3-polish Looks great Can I put this coating on top of that for super gloss and Protection ? Thanks Also purchasing new white truck canyon Denali should I just coat everything new to keep it that way ? What do you recommend after a wash ? Some type of ceramic detailed ? Thanks

Can I remove dried dog spit

Powder coat safe? I also have white wheels. Been using BB diluted 3:1. Recently picked up Adams over the hype n it works great on my clients vehicles.

Very interesting. I need to try this.

adams and/or meguiars are my goto’s i think adam’s takes the win tho

I always say to myself just a quick clean, but end up just fully cleaning my interiors. Its that feeling of knowing it really is clean that I can't shake off my system

I like the interior detailer. But it adds dust and the micro ban is gone. I do the whole thing with total interior cleaner now.

So, from advice from a shop owner, I bought Adam's Brilliant Glaze to tackle very stubborn cloudy haze on the inside of the windshield on my new to me Lexus LS460. I applied the Glaze and allowed the Glaze to set for well over half an hour. Did inside and outside, applying with a microfiber pad and wiping away with a fresh MF towel. Still have the cloudy haze. I have repeated the treatment with no better result. Is there anything slightly harsher to use? Is there any possible damage I could do to the inside of the windshield? Thanks

I wash my car once a year ~ Im not trying to impress anyone

Me: "Let me vacuum up this junk because I can't stand it anymore." Me (2 hours later because of the spiraling rabbit hole): "Aaah, you're lookin' good, kiddo!"

Can you use the polisher on the plastic that's between the glass? What do you do if even the compound doesn't work on your paint.

If you squint, your hand in the thumbnail looks like Joe Biden.

do you wash the car after polishing if im gona add a ceramic coating? to remove the polish

do you clay bar the lights? also should i polish the lights too?

Adam’s stuff is dope! It actually works unlike chemical guys bullshit in a bottle

Have a steam cleaner drill brush and a little green machine

Wow, this video short-circuits my brain after seeing so many other videos for years from people who claim nothing but perfection. To be honest this is the type of 80/20 I'm fan of. Not much effort and good enough results. However, even to me, that looks like half-assing on prep and application. Not only is he not being thorough with the claying and application throughout the whole panel(s), but also his constant rubbing with the bare hands screams micro-scratches to me. I guess things have changed since I stepped away from being a garage fanatic for the last couple years.

I just got uour interior clean product and really like it!😊

Or make a thinner barrel brush,oh wait they do

Can you apply this outside?

Timely! I'm cleaning my interior tomorrow lol

I use the graphene boost spray for drying and it works great

Really needed this video thanks Adams!

Dave is right... never... never... never pressure wash your engine... actually dry with a towel..blow dryer pushes water in electrical places they should not go....

I'm curious how this would hold up on a flat bed tow truck

I’ve had mine get weak on me as well. Used a gentle fast water spot remover and it came right back to life. Loving the coating. Just have to keep it from clogging.

i have a car with a really marred coating/paint and 4 year old gtech serum ultra. The car has just been used a lot. Im pretty sure the ceramic coating is still reasonably active as when you clean it with some iron remover and claybar it does somewhat come back to live. I suppose with the marring/small scratches it would be better to polish the whole thing "off" and then recoat as the polishing/compounding will take the residual serum ultra off?

Awesome video! No other channel shows you how to save ceramic❤ coating in so detail

Do you polish/wax after applying the spray graphene ceramic coating? Do it periodically (polish/wax)? With the spray, how often do you apply?

Good video, can you tell me what tip was on the spray gun? Was it a 3.0/40 degrees? Thanks

Should I apply right after a paint job?

It’s contaminated with mineral deposits , use a waterspot remover

Perforated clay mitts are better. Just saying.

No 40 degree nozzle?

Good video, I was not a fan of the wash pad though. I found it did not let go of debris and even after washing it in the washing machine there were still particles in it. I never used it again and went with 2 microfibre wash mitts, one for the top and side surfaces and one for bumpers and rockers

Great video thanks

Do you guys make a high or low PH soap?

Rinse Aid on the wheels is such a perfect combo. So easy!

When do you use graphene cs3 over the other choices?

Hi There🖐 I enjoyed your video. Well done, good explanations! Cheers!!..😎

Appreciate the video! What's the main difference between Graphene Detail Spray and Graphene CS3?

can you use graphene detail spray on something else (not graphene coated right now)? ex: currently my car is coated in a hybrid and I haven't had the time to switch to graphene yet...considering the spray advanced application

How is this any less work than a non coated car ?

I love using graphene detail spray whenever I wash my car

If i use hand polish on my graphene ceramic coated vehicle will it strip away the coating. I got water spots from a sprinkler im trying to remove.

Really helpful, thanks